Illustrative imagePhoto: A. Josef Dernbecher, CC BY-SA 3.001 · Coils
HR Coil
Hot Rolled Coil
Steel strip rolled above recrystallisation temperature and wound into coil, typically with a grey-blue mill-scale surface.
View product
Aisle stop 03 / 08 · Coils
CR Coil
Cold Rolled Coil & Sheet
Cold rolled (CR) steel is hot rolled strip that has been pickled and reduced further at room temperature. The result is a smoother surface, tighter tolerances and better formability for pressing, drawing and painting.
The current website lists cold rolled sheet in coil or cut lengths. The size ranges and grades below came from that page and still need confirmation.
Size range
| Thickness | 0.50 mm – 3.00 mm |
|---|---|
| Width | 900 mm – 1550 mm |
| Length / form | Coil, or 2 m – 6 m sheets |
Other sizes may be available on request. Ask for your exact dimensions.
Grades
Drawing & forming quality
- IS 513 CR1 / CR2 / CR3 / CR4IS 513
- DC01 – DC06EN 10130
- SPCC / SPCD / SPCEJIS G3141
High strength (HSLA) CR
- HC260LA – HC500LAEN 10268
Typical applications
- · Automotive panels
- · Domestic appliances
- · Furniture
- · Panels and enclosures
- · Drums and containers
- · General engineering
Source mills
TATA Steel · JSW · SAIL
Jayesh Steel is a trader. Material is produced by steel mills, not by Jayesh Steel. Mill test certificate availability: to confirm.
Related products
- Illustrative imagePhoto: A. Josef Dernbecher, CC BY-SA 3.0
Illustrative imagePhoto: Neil Theasby, CC BY-SA 2.002 · Plates
HR Plate
Hot Rolled Steel Plate
Hot rolled plate for fabrication, structural and general engineering work. Listed on the current website from 5 mm to 200 mm.
View product
Illustrative imagePhoto: Shandong Mingtong Metal, CC BY-SA 4.004 · Plates
HT Plate
High Tensile Steel Plate
Plate with higher yield and tensile strength than standard mild steel, used where weight or section thickness must come down.
View product